Gilera Nexus 250 i.e. Manual Download Page 32

Page: 32 / 96

Checks

Before using the scooter for the first time check:

1. That the fuel tank is full.

2. Front brake and combined system fluid level.

3. That the tyres are properly inflated.

4. The correct functioning of the tail lights, the headlight, the turn indicators and the
stop light.

5. The correct functioning of the front brakes and the combined system.

6. The oil level in the gearcase.

7. The engine oil level.

8. The coolant level.

02_01

Refuelling (02_01, 02_02)

Fuel:

Remove the tank cover «

».

Recommended fuel: Minimum 95 octane unleaded gasoline. Fuel level is indicated on
the digital instrument panel

WARNING

SWITCH OFF THE ENGINE BEFORE REFUELLING WITH PETROL.

PETROL IS HIGHLY INFLAMMABLE.

DO NOT SMOKE AND KEEP NAKED FLAMES AT A DISTANCE:FIRE HAZARD.

DO NOT INHALE FUEL FUMES.

2 Use

Summary of Contents for Nexus 250 i.e.

































































































Search results

Summary of Contents for Nexus 250 i.e.

Reviews:

Related manuals for Nexus 250 i.e.

Brands by name

Popular brands

Gilera Nexus 250 i.e., Manual

Search results

Summary of Contents for Nexus 250 i.e.

Reviews:

Related manuals for Nexus 250 i.e.

Brands by name

Popular brands