Gilera Nexus 250 i.e. Manual Download Page 22

Page: 22 / 96

01_19

01_20

01_21

Keys (01_19, 01_20, 01_21)

Two types of key are supplied with the scooter. The red-handgrip key «

» is the

MASTER

» key. Only a single copy of this key is supplied, which is necessary to

program the codes for all your other keys and for your dealer to perform some main-
tenance operations. We therefore recommend that it be used only under exceptional
circumstances.

The black key «

» (single copy supplied) is used for normal operations such as:

- engine start-up

- unlocking the fuel tank cover

Together with the two keys, you will be given a

CODE CARD

bearing the mechanical

code of the keys.

WARNING

LOOSING THE RED KEY PREVENTS ANY REPAIRS OF THE 'PIAGGIO IMMO-
BILIZER' SYSTEM AND THE ENGINE CONTROL UNIT.

WARNING

KEEP THE 'CODE CARD' AND THE RED HANDGRIP KEY IN A SAFE PLACE (NOT
ON YOUR VEHICLE).

1 Vehicle

Summary of Contents for Nexus 250 i.e.

































































































Search results

Summary of Contents for Nexus 250 i.e.

Reviews:

Related manuals for Nexus 250 i.e.

Brands by name

Popular brands

Gilera Nexus 250 i.e., Manual

Search results

Summary of Contents for Nexus 250 i.e.

Reviews:

Related manuals for Nexus 250 i.e.

Brands by name

Popular brands