Gilera Nexus 250 i.e. Manual Download Page 15

Page: 15 / 96

01_08

Maintenanceicons (01_08)

The icons signal the user that scheduled maintenance operations should be carried
out.
The flashing icon «

SERVICE

signals the need to carry out the scheduled mainte-

nance service.

The flashing icon «

BELT

signals the driving belt needs to be checked or replaced.

In any case, vehicle maintenance must be carried out at the service intervals recom-
mended in the Scheduled Maintenance.

WARNING

REFER TO THE «SCHEDULED MAINTENANCE TABLE» FOR FURTHER MAIN-
TENANCE OPERATIONS

Settingthetotalandtripodometers

Pressing the «

ODO/SET

» button, the display shifts from total to partial odometer. Hold

ODO/SET

» button down longer than 3 seconds to reset the partial odometer, mean

speed, mean consumption and maximum speed gauges.

1 Vehicle

Summary of Contents for Nexus 250 i.e.

































































































Search results

Summary of Contents for Nexus 250 i.e.

Reviews:

Related manuals for Nexus 250 i.e.

Brands by name

Popular brands

Gilera Nexus 250 i.e., Manual

Search results

Summary of Contents for Nexus 250 i.e.

Reviews:

Related manuals for Nexus 250 i.e.

Brands by name

Popular brands