Gilera Nexus 250 i.e., Manual

Page: 24 / 96

VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
IF OWNERSHIP OF THE VEHICLE IS TRANSFERRED TO ANOTHER PERSON,
THE KEY WITH THE RED GRIP (AS WELL AS THE OTHER KEYS) AND THE
"CODE CARD" MUST BE ALSO TRANSFERRED TO THE NEW OWNER.
Programmingtheimmobilizersystem
The procedure for programming the « PIAGGIO IMMOBILIZER » system and/or for
storing other key codes is described below.
Procedurestart-redkey
Make sure that the emergency cut-off switch is set to « ON » and the side stand is up.
Insert the red handgrip key into the switch key (in « OFF ») and turn it to « ON ». After
1 - 3 seconds, turn the key to " OFF " again and pull it out.
Intermediatestep-blackkey
After pulling out the red key, insert the black key within 10 seconds and promptly turn
it to «
ON ». After 1-3 seconds, turn the key to « OFF » again and pull it out. In this way,
a maximum of 7 black keys can be programmed by repeating the above procedure
keeping the indicated times.
Properprogrammingcheck
Insert the red key disabling the transponder (i.e., tilt the key cap by 90°) and turn the
key to "
ON ". Perform the engine starter operation. Ensure that the engine does not
start. Insert the black key and repeat the start-up operation. Check that engine starts.
24
1 Vehicle