the first PlayList (triggered by the ‘a’ input)
will have one more SoundFile than the
second PlayList (triggered by ‘b’ input).
The
Sd-25
will loop the last SoundFile on the
card whenever it isn’t playing a triggered
SoundFile. The background looping
SoundFile will start playing as soon as the
Sd-25
is powered up.
Even if the ‘no step’ switch is ‘on’
(
DipSwitch #9
), the background SoundFile
can be stepped upon by a trigger to play a
SoundFile from the ‘a’ or ‘b’ inputs. The
Sd-25’s
‘status’ relay output only goes active
when it is playing a triggered SoundFile.
If both the ‘a’ and ‘b’ inputs are held
simultaneously, the audio will fade out to the
level set by
DipSwitches #6
and
#7
and
stay there until at least one of the inputs is
released.
A ‘short’ pulse (more than
⅛
second, but less
than
¼
second) on the ‘a’ or ‘b’ (or both)
inputs ‘reshuffles’ the ‘PlayLists’.
The one triggered SoundFile that is selected
will only play once (no looping).
The fade rate is fixed in this mode to the
‘slowest’ possible speed.
Options:
Option #3:
The fade level (fully muted, -9
dB, -18 dB or -33 dB) is selected using
DipSwitches #6 and #7
.
Option #8: DipSwitch #8: Randomizer.
When on, SoundFiles are played in random
order, rather than sequentially.
Option #9: DipSwitch #9: Unsteppable.
When this switch is ‘off’, if the ‘a’ or ‘b’ trigger
input is pressed, then released before the
triggered SoundFile has played, the audio
will simply ramp back up to the normal level.
When this switch is ‘on’, then even a short
press of the ‘a’ or ‘b’ trigger input will ramp
the background sound and play the triggered
sound, restart the background sound and
ramp the volume back up to the ‘normal’
audio playback level. A second trigger will
not be accepted until after the triggered
sound has played. Reshuffles are disabled
when this switch is ‘on’.
Mode 1E / off/on/on/on/on:
Fade out and Trigger SoundFiles one or two, with a
background Looping PlayList
Like Mode 18, except it fades out the
SoundFile that is playing to the level set by
DipSwitches #6 and #7
BEFORE starting
the newly triggered SoundFile.
Input ‘a’ plays the first SoundFile on the Sd Flash
card. Input ‘b’ plays the second SoundFile
on the
Sd Flash card.
If not playing either of these
SoundFiles, then SoundFiles 3 through ?? will be
played. If the ‘Random’ switch (
DipSwitch #8
) is
‘on’, the background SoundFiles will be played in a
Random order.
Even if the ‘no step’ switch is ‘on’ (
DipSwitch #9
),
the background SoundFile can be stepped on by a
trigger to play a SoundFile from the ‘a’ or ‘b’ inputs.
The
Sd-25’s
‘Status’ Relay Output only goes
active when it is playing a triggered
SoundFile.
There must be at least three SoundFiles on the
Sd-25
for this mode.
If both the ‘a’ and ‘b’ inputs are held
simultaneously, the audio will fade out to the
level set by
DipSwitches #6 and #7
and
stay there until at least one of the inputs is
released.
A ‘short’ pulse (more than
⅛
second, but less
than
¼
second) on the ‘a’ or ‘b’ (or both)
inputs ‘reshuffles’ the ‘PlayList’.
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Sd-25 w/DMX Manual • page 31 of 40 • © July 21, 2017 • Gilderfluke & Co. • DCM
