background image

Sollos   Landscape   Lighting   •   2940   Pacific   Drive   •   Norcross,   GA      30071   •   888-­‐976-­‐5567   •   www.solloslighting.com   

SCSBTR

   

 

Blue Tooth 

Repeater

   

1)

Locate the Repeater in the desired location.

NOTE: 

for best connectivity between the repeater and the installed Sollos

®

 ColorSplash

®

 lamps

 

and

 

fixtures, it is recommended to locate the repeater in an area that is the most central

 

location to the

 

installed Sollos

®

 ColorSplash

®

 products.

2)

Install the repeater antenna by screwing it into the antenna plug located on the top 

of the 

repeater.

3)

Use the supplied double-sided tape or screw hardware to mount the repeater.

4)

Mount the repeater a minimum of 4" off of the ground.

5)

The Repeater power cable can be routed straight out the back or out the bottom of the unit.

 

For

 

routing out the bottom, press the power cable into the slot on the back of the unit.

Installation   Instructions   

Importan

t:   This   

device

   is   designed   for   use   with   

12

low   voltage   landscape   power   syst

ems

.

WARNINGS

:   

This   

device

   must   be   installed   in   accordance   with   the   National   Electric   Code   and   local   code   specifications.   

Failure   to   follow   these   codes   and   installation   instructions   will   void   the   warranty   and   may   result   in   
serious   injury   and/or   damage   to   the   

device

.   When   using   

this device with 

multiple   

landscape lighting 

fixtures,   

 

do   not   exceed   total   wattage   load   as   specified   by   the   transformer   rating.   This   product   is   designed   

 

for   above   ground   installation   only.   Keep   these   installation   instructions   for   future   use.   

IMPORTANT   SAFETY   WARNI

NGS

:   

To reduce the risk of personal shock and injury, turn off the system power before installing the 
repeater.

 

Install   the   

repeater

   no   less   than   ten   feet      from   pools,   spas,   or   fountains   to   

 

minimize   risk   of   electric   shock.   

 

Always   use   UL   listed   wire   and   wire   connectors   for   connections.   

 

MOUNTING  THE REPEATER:

 

2

A Halco Lighting Technologies company

www.solloslighting.com

Reviews: