1
SECTION 1 - INTRODUCTION
1
MDE-5224F
Purpose
This manual provides instructions to install a 5.7-inch Color Screen FlexPay™
IV CRIND® Retrofit Kit in The
Advantage® Series (with or without CRIND). The FlexPay IV CRIND provides a secure payment platform that
is EMV®-certified and Payment Card Industry PIN Entry Device (PCI-PED)-certified.
This manual also includes instructions for installing DCM2.2 (M15737A001) in the FlexPay IV units.
Intended Users
This manual is intended for Gilbarco®-trained and certified Authorized Service Contractors (ASCs).
Required Tools
• Phillips® and Flat-blade Screwdrivers
• 1/4-inch Socket Set (Nut Driver)
• 7- and 8-mm Socket (Nut Driver or Socket Set)
• Diagonal Cutters
• Needle Nose Pliers
• T15 Torx Driver
• Universal Joint Socket Adapter
• Putty Knife or Scraping Tool (if required)
Configured Kits - Parts List
FlexPay IV CRIND Retrofit Kits are configured based on the serial number of the pump/dispenser unit for
which they are intended. Therefore, the parts list will vary for each configured kit and unit/option type.
For additional part details, refer to the Bill of Materials (BOM) in the kit, contact your distributor, or contact
Gilbarco Customer Service.
A common FlexPay IV CRIND Retrofit Kit will include the following parts:
• CIM™ insert with Universal Payment Module (UPM) assembly (keypad), UX300/301 card reader,
display, Peripheral Interface PCB (PIP)3
• T-rail assembly with Auxiliary Feature PCB (AFP)/Dispenser Communication Module (DCM) 2
• Universal Serial Bus (USB) Printer assembly
