7
SECTION 3 - REMOVING COMPONENTS
3
MDE-5224F
CRIND Electronics
Note: If the unit is not equipped with CRIND, proceed to the installation instructions beginning with
“FlexPay IV CRIND Retrofit Kit”
.
To remove the existing CRIND electronics from the cabinet:
1
Disconnect all the cables connected to the CRIND tray.
2
Disconnect the cables that are connected to the printer. Then remove all the CRIND cables and place
with the CRIND tray, when removed.
3
Remove the CRIND tray by pulling it out toward you and lifting it out of the support bracket
(see
).
Figure 2: Removing CRIND Tray
(ii)
(i)
4
Remove the tray and carefully place it in a safe location.
