51
Lines
Gigaset T300 PRO / Gigaset T500 PRO / EN Master / A31008-M2212-R102-1y-7619 / admin_administration.fm / 02.12.2010
V
e
rsion 2, 06.0
8
.2010
ISDN connection (external/internal)
The first step for configuring ISDN lines is specifying external or internal.
u
Select
ISDN external
, if the line is to assume the connection to the telephone network.
u
Select
ISDN internal
to use the line for ISDN fax machines, ISDN pones or as a connec-
tion to an existing PABX.
The ISDN card must be connected with a crossover cable at the terminal for the
external connection to the telephone network. For Gigaset T300 PRO / Gigaset T500 PRO
PABXs, use the crossover ISDN cable supplied.
Analogue cards
Depending on the type of card used and its design, either one of the following options
is available or both.
u
Analog External
(FXO interface) is for a connection to the telephone network.
u
Analog Internal
(FXS Interface) is intended for connecting analogue devices such as
fax machines or phones.
Number range
Enter the phone number(s) of your VoIP or ISDN provider here. If the
Country Code
or the
Area Code
deviate from the general settings in the
Preferences
tab, enter these here.
The
Number Type
selection aids the input of several phone numbers or number ranges.
The method of input does not affect the functionality of the line.
Examples:
u
Single Number
: You have individual phone numbers: 2345-11, 2345-13, 2345-15.
As these are not consecutive, select
Single Number
and add each number by clicking
on
p
.
u
Number Block
: Your provider has issued you with the numbers 2345-1 to 2345-99.
Enter
2345
as the phone number and
1
to
99
as the number range.
Important
After any change to the ISDN configuration, the telephony subsystem must be
restarted. This will end all running connections!
Please note
Each analogue line can only be assigned one connection on the analogue card.
