48
Lines
Gigaset T300 PRO / Gigaset T500 PRO / EN Master / A31008-M2212-R102-1y-7619 / admin_administration.fm / 02.12.2010
V
e
rsion 2, 06.0
8
.2010
Additional options for the provider configuration
auth
When authenticating using user name and password, the login data is
transferred as either
plaintext
or encoded (
md5
,
rsa
).
canreinvite
yes
provides clients with the option to exchange data directly (without
server involvement) after establishing a connection. As several hardware
components malfunction with this setting, the default value
no
should
not be changed.
qualify
Either
yes
,
no
or a specification in milliseconds. With
yes
, the server tests
at regular intervals whether the client is still contactable with each query
lasting 2000 ms. If the client does not react within this timeframe, it is
regarded as not available for Gigaset T300 PRO / Gigaset T500 PRO and no
other calls are forwarded to the client.
Please note
We can only provide general explanations and recommendations here, as the config-
uration parameters vary from provider to provider. This is why it is advisable to contact
your provider about the correct settings.
permit
IP address(es), via which the client can log on to the Gigaset T300 PRO /
Gigaset T500 PRO server. Either a pure IP (e.g., 192.168.0.1 ) or IP/subnet
mask (e.g., 192.168.0.2/255.255.255.0). Multiple entries must be sepa-
rated by commas.
deny
Is the opposite of
permit
and excludes the IP addresses specified here.
nat
no
is the default value.
yes -
if the provider's VoIP server (see address in
host
) is not directly contactable, but the address is affected by NAT.
disallow
It is advisable to prohibit all codecs by specifying
all
and explicitly allow
the codecs of your choice by specifying these in the
allow
field. These
must be entered as comma-separated values, e.g.,
alaw,ulaw
.
insecure
very
- if the host is already registered, it can establish connections with-
out having to reauthenticate itself.
yes
- a peer can register himself easily
with the IP address (i.e., without specifying a specific port).
progressinband
yes
,
no
or
never
(default value).
port
The port number 5060 is the default value for the SIP protocol on the
Gigaset T300 PRO / Gigaset T500 PRO server. This value can be replaced
by a port number to be used exclusively for SIP.
defaultip
If the default IP address for the host; if the
host
field is assigned a
dynamic
value, the Gigaset T300 PRO / Gigaset T500 PRO will attempt to
establish connections via this IP address.
Only effective for type=peer
rtptimeout
Number of seconds after which a connection is automatically terminated
after data traffic inactivity (RTP). This is advisable, e.g., when a subscriber
forgets to replace the receiver.
Only effective for type=peer
