Gigaset T300 PRO Administrator'S Manual Download Page 22

Page: 22 / 94

Groups

Gigaset T300 PRO / Gigaset T500 PRO / EN Master / A31008-M2212-R102-1y-7619 / admin_administration.fm / 02.12.2010

rsion 2, 06.0

.2010

Editing group preferences

There are only minor differences between group and user administration. Just like users,
groups have phone numbers (

Assigning phone numbers

), voicemail boxes

Click on the editing icon in the

List of registered groups

window. You can configure

or edit all group data here.

The call properties for a group

Ringing Strategy

: Apart from the standard call functions, simultaneous ringing of the

phones for all logged-in group members (

ring-all group

), the following options are avail-

able:

Broadcast

This option has only been available on Gigaset IP PRO phones so far.
Similar to an announcement (i.e., without having to actively accept the
call), all members will receive the call via the phone loudspeaker.

Call hunting

The call is directed to only one group member. If the call is not accepted
within 15 seconds, the next member's phone will ring and so on.

Software fax

This function turns the group into a collection point for faxes sent to
the group's phone number. All members of the group will receive these
faxes.

Please note

Extended

module configurations may create an additional option for the

Ringing

Strategy

Summary of Contents for T300 PRO































































































Search results

Summary of Contents for T300 PRO

Reviews:

Related manuals for T300 PRO

Brands by name

Popular brands

Gigaset T300 PRO, Administrator'S Manual

Search results

Summary of Contents for T300 PRO

Reviews:

Related manuals for T300 PRO

Brands by name

Popular brands