manualshive.com logo in svg

Gigaset SX763, First Steps

The Siemens SX763 user manual is essential for a seamless understanding of this advanced product. Easily download the comprehensive manual for free from our website, ensuring hassle-free setup and operation. Take full advantage of the Siemens SX763's features with our user-friendly manual available for download at manualshive.com.

Share
Download
background image

17

The Gigaset SX763 WLAN dsl

Gigaset SX763 WLAN dsl / eng / A31008-M707-R131-8x-7619 / introduction.fm / 22.10.2008

Sc

ha

bl

on

e 20

05_

07

_27

The first time this button is pressed, the device automatically creates a SSID and a 
pre-shared key, if these had not been already set on delivery or has been configured 
before manually. If a client activates WPS registration within the two-minute inter-
val, the security data is exchanged and a connection is established. Only 

one

 client 

may synchronise during the two-minute interval. After the successful synchroniza-
tion the registration is closed.
The automatically or manually created security data is valid for all further WPS reg-
istration processes. If you change this security data again manually or after a factory 
reset the clients have to be registered again.

u

Via Personal Identification Number (PIN) 

The PIN offers improved security for registration. No other device (e.g. in an adjacent 
room) can log in unnoticed. A PIN is used for registration which must be identical on 
both devices. If a client logs in with this PIN, the security data is synchronised. Usu-
ally the PIN of the access point is used. For security reasons a new PIN can be cre-
ated.
It is also possible to create the PIN on one of the clients.
Further information you will find in chapter "Starting WPS registration and configur-
ing WPS" on page 90.

WLAN adapters without WPS can also be set up manually, i.e. the SSID and key must be 
entered manually. How you can find out which SSID and which pre-shared key is set, you 
can read in chapter "Configuring wireless connections" on page 87. 
WPS cannot be used together with WEP encryption or WPA/WPA2 authentication.

Access Point

Generating the PIN via con-
figuration user interface

Repeater or 

Entering and activating the PIN 
via configuration user interface

SSID and pre-shared key

Registering

WLAN network adapter

(((

Summary of Contents for SX763





































































































































































































Reviews:

No comments

Related manuals for SX763

3Com TokenLink 3C359B Release Note preview
TokenLink 3C359B
Brand: 3Com Pages: 4
3Com TokenLink 3C359B Quick Start Manual preview
TokenLink 3C359B
Brand: 3Com Pages: 8
3Com TokenLink 3C339 Release Note preview
TokenLink 3C339
Brand: 3Com Pages: 2
3Com EtherLink 3C985B-SX Installation And User Manual preview
EtherLink 3C985B-SX
Brand: 3Com Pages: 44
3Com 3CR990 Administration Manual preview
3CR990
Brand: 3Com Pages: 88
3Com 3C16080 Important Information preview
3C16080
Brand: 3Com Pages: 2
3Com 3C905C-TX-M User Manual preview
3C905C-TX-M
Brand: 3Com Pages: 111
3Com TokenLink 3C359 Release Note preview
TokenLink 3C359
Brand: 3Com Pages: 4
3Com 3C421600A Quick Setup Manual preview
3C421600A
Brand: 3Com Pages: 74
3Com 3C421600A Installation Manual preview
3C421600A
Brand: 3Com Pages: 6
N-Tron 7018 User Manual & Installation Manual preview
7018
Brand: N-Tron Pages: 138
Ubee DVW3201B User Manual preview
DVW3201B
Brand: Ubee Pages: 9
Juniper TX MATRIX PLUS Hardware Manual preview
TX MATRIX PLUS
Brand: Juniper Pages: 502
QNAP TS-130-US User Manual preview
TS-130-US
Brand: QNAP Pages: 39
Far Tools MR 40PB Original Manual Translation preview
MR 40PB
Brand: Far Tools Pages: 24
Eicon Networks Diva 2440 Quick Start Manual preview
Diva 2440
Brand: Eicon Networks Pages: 32
WolfPack 18x18 Card Cage User Manual preview
18x18 Card Cage
Brand: WolfPack Pages: 31
ZyXEL Communications Prestige 100L Quick Start Manual preview
Prestige 100L
Brand: ZyXEL Communications Pages: 170

Brands by name

Popular brands

Load more brands