83
Configuring Advanced Settings
Gigaset SX763 WLAN dsl / eng / A31008-M707-R131-8x-7619 / configure_router.fm / 23.10.2008
Sc
ha
bl
on
e 20
05_
07
_27
Routing
Your Internet service provider can permit you to set up a number of connection services.
The entire data traffic between your local network and the Internet uses the first con-
nection service (route) by default. After setting up various connection services
(page 64), you can change this default route and set up additional routes by assigning
data traffic to other connection services. Rules are provided to assist you, these define
criteria for determining which data traffic is assigned to which connection service.
ì
In the
Advanced Settings
menu, select:
Internet
–
Routing
ì
Activate or deactivate
Policy-based routing
for your Internet connection.
ì
Choose the
Policy type
, i.e. how you would like to define the various routes for data
traffic between your local network and the Internet:
– Choose
Specify interface
to specify routes for clients in your local network
depending on the port used for connecting to your device (e.g. LAN port or wire-
less network connection).
– Choose
Specify IP address
,
Specify IP address range
or
Specify MAC address
to specify routes for clients depending on your IP address or MAC address.
If you choose
Specify MAC address
, you can select PCs from the list of known
clients.
ì
Click
Delete
to delete an entry.
ì
Click
Add
to create a new entry with the entered data or for the selected client.
ì
Click
OK
to save and apply the changes.
ì
Click
Cancel
to reject the changes.
