Gigaset SX763 First Steps Download Page 42

Page: 42 / 196

The user interface

Gigaset SX763 WLAN dsl / eng / A31008-M707-R131-8x-7619 / configure_router.fm / 23.10.2008

e 20

05_

_27

Selecting a language

The user interface can be presented in various languages.

Click

Language

at the top right of the start screen.

If you wish to change the preset language, select the new language you require from
the list.

Click

to apply the setting.

Once the procedure has been concluded, the start screen will be displayed again.

Connecting to the Internet manually

Once you have configured your Internet access (see page 46 and page 66), you can
establish a manual connection to the Internet on the start screen if you have selected

Connect on demand

Connect manually

as the Connection mode.

To establish or end an Internet connection manually:

Open the start screen of the Gigaset SX763 WLAN dsl as described on page 39.
If you have already started the user interface, click the

Home

tab at the top left of

the window.
If you have not yet started the user interface, do so now and log on.

Click

Connect

to establish a connection to the Internet.

Click

Disconnect

if you no longer require the connection.

Summary of Contents for SX763





































































































































































































Search results

Summary of Contents for SX763

Reviews:

Related manuals for SX763

Brands by name

Popular brands

Gigaset SX763, First Steps

Search results

Summary of Contents for SX763

Reviews:

Related manuals for SX763

Brands by name

Popular brands