Gigaset SX763 First Steps Download Page 112

Page: 112 / 196

112

Configuring Advanced Settings

Gigaset SX763 WLAN dsl / eng / A31008-M707-R131-8x-7619 / configure_router.fm / 23.10.2008

e 20

05_

_27

USB

The USB port of your Gigaset SX763 WLAN dsl can be used to set up a

Go to the

Advanced Settings

menu and select:

USB

Select the

option for

USB

Click

to activate the USB port.

If a USB device is connected, its

Status

is displayed. If a USB mass storage device is con-

nected, the partitions are displayed.

Click

Refresh

to display the current status.

File Server

to share a USB mass storage device (page 113)

Print Server

to share a printer (page 119)

Web Server

to provide a Web server (page 119)

Notes:

If you connect a USB hub to the USB port of the Gigaset SX763 WLAN dsl, you can
connect and use a USB memory and a USB printer at the same time.

If connecting a device without its own power supply directly to the USB port,
please note that the power consumption must not exceed 500 mA.

The Gigaset SX763 WLAN dsl supports USB V 2.0. Devices that support USB V 1.1
may also be connected.

The following file system formats are supported: FAT, FAT32, VFAT
NTFS is not supported.

There should be not more than 1000 files stored in any directory of the USB mass
storage device.

Summary of Contents for SX763





































































































































































































Search results

Summary of Contents for SX763

Reviews:

Related manuals for SX763

Brands by name

Popular brands

Gigaset SX763, First Steps

Search results

Summary of Contents for SX763

Reviews:

Related manuals for SX763

Brands by name

Popular brands