Gigaset SX763 First Steps Download Page 19

Page: 19 / 196

The Gigaset SX763 WLAN dsl

Gigaset SX763 WLAN dsl / eng / A31008-M707-R131-8x-7619 / introduction.fm / 22.10.2008

e 20

05_

_27

Security functions

The Gigaset SX763 WLAN dsl offers comprehensive security measures:
–

Firewall

protection against unauthorised access from the Internet

All PCs in the local area network use the

Public IP address

of the Gigaset SX763

WLAN dsl for their Internet connections, which makes them 'invisible' on the

Internet. The Gigaset SX763 WLAN dsl only allows access from the Internet if this

has been requested from within the local area network.
With the firewall, the Gigaset SX763 WLAN dsl also offers comprehensive protec-

tion against hacker attacks.

– Service filtering

The Gigaset SX763 WLAN dsl can filter Internet access. Here you determine which

PCs may access which Internet services.

– Access control and encryption for the local area network

The Gigaset SX763 WLAN dsl is delivered with a predefined individual encryption

(WPA2-PSK/WPA-PSK with pre-shared key). You will find the corresponding infor-

mation at the label on the devices bottom. So, your wirless network is protected

against unauthorised access.
If there are wireless network adapters of your PCs do not support this encryption

method, you can use other encryption methods and authentication methods

(WEP, WPA/WPA2, 802.1x) to prevent unauthorised access to your wireless LAN

or to make data illegible to unauthorised parties.
With MAC access control you can allow wireless access to selected PCs.

Offering your own services on the Internet

– If you want to offer your own services on the Internet, you can set up the Gigaset

SX763 WLAN dsl as a virtual server without permitting further access to the local
area network.

–

DMZ

(Exposed Host)

This allows you to release a PC in your local area network for unlimited access

from the Internet. Note that in this case your local area network will no longer be

adequately protected against Internet attacks.

Providing an HTTP or FTP server via USB interface

– You can easily establish an FTP or an HTTP server for Internet access with the

Gigaset SX763 WLAN dsl.

– You can connect a USB hub to the USB port on your Gigaset SX763 WLAN dsl and

thereby at the same time provide a printer and a storage medium for all clients in
your local area network.

Summary of Contents for SX763





































































































































































































Search results

Summary of Contents for SX763

Reviews:

Related manuals for SX763

Brands by name

Popular brands

Gigaset SX763, First Steps

Search results

Summary of Contents for SX763

Reviews:

Related manuals for SX763

Brands by name

Popular brands