Gigaset SX763 First Steps Download Page 47

Page: 47 / 196

Basic Setup Wizard

Gigaset SX763 WLAN dsl / eng / A31008-M707-R131-8x-7619 / configure_router.fm / 23.10.2008

e 20

05_

_27

Your Internet service provider may disconnect and reconnect your Internet connec-
tion daily. In this case enable

24h reconnection

and choose the period of time in

which the reconnection should be performed from the

Reconnection time

option

menu.

Specify how Internet sessions are to be established via

Connection mode

– Select

Always on

if the connection is to exist at all times when the Gigaset SX763

WLAN dsl is turned on.

– Select

Connect on demand

if applications such as an Internet browser or an e-

mail program are to connect to the Internet automatically.

– In the

Idle time before disconnect

field, enter a period after which the Internet

connection is to end automatically if no data is transmitted (the default setting is
3 minutes).
You can deactivate this function by entering "0". This means that the connection

will continue to exist even if no data is transmitted. If you are on a time-based tar-

iff, this can result in high charges. In this case you should enter a value other than

"0".
This time setting only applies to the

Connect on demand

and

Connect manu-

ally

options.

– Select

Connect manually

if you always want to establish and end the Internet

connection manually. If you are on a time-based tariff this will save you high con-
nection charges.

You can show additional settings, depending on the selected service provider, by
means of the

Show Additional Settings

button. You can also change the settings,

if required. These settings are pre-set with appropriate default values. This button is
not available for the

Other

selection since all available settings are displayed in this

case.

Click

Test Settings

to check the Internet connection.

An attempt is made to set up an Internet connection. The result is shown in a window.
If the connection could be set up successfully, the

Close

button appears.

Click the

Close

button to return to the

Basic Setup Wizard

Note:

Connection to the Internet is only possible if you have entered all the data for your
Internet service provider correctly.

Notes:

This option can result in high connection charges if you are on a time-based
tariff.

You must set up the

Always on

option if you wish to use Internet telephony.

Summary of Contents for SX763





































































































































































































Search results

Summary of Contents for SX763

Reviews:

Related manuals for SX763

Brands by name

Popular brands

Gigaset SX763, First Steps

Search results

Summary of Contents for SX763

Reviews:

Related manuals for SX763

Brands by name

Popular brands