manualshive.com logo in svg

Gigabyte E251-U70, User Manual, Page: 89 / 111

Share
Download
Gigabyte E251-U70 User Manual Download Page 89

- 89 -

BIOS Setup

5-4  Server Management Menu

Parameter

Description

FRB-2 Timer

Enable/Disable FRB-2 timer (POST timer).
Options available: Enabled/Disabled. Default setting is 

Disabled

.

FRB-2 Timer 
timeout

Configure the FRB2 Timer timeout.

Options available: 3 minutes, 4 minutes, 5 minutes, 6 minutes. Default setting is 

6 

minutes

.

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

FRB-2 Timer Policy

Configure the FRB2 Timer policy.

Options available: Do Nothing, Reset, Power Down, Power Cycle. 
Default setting is 

Do Nothing

.

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

OS Watchdog 
Timer

Enable/Disable OS Watchdog Timer function.
Options available: Enabled/Disabled. Default setting is 

Disabled

.

OS Wtd Timer 
Timeout

Configure OS Watchdog Timer.

Options available: 5 minutes, 10 minutes, 15 minutes, 20 minutes. Default setting is 

5 minutes

.

Please note that this item is configurable when OS Watchdog Timer is set to 

Enabled.

Summary of Contents for E251-U70
















































































































Reviews:

No comments