manualshive.com logo in svg

Gigabyte E251-U70, User Manual, Page: 77 / 111

Share
Download
Gigabyte E251-U70 User Manual Download Page 77

- 77 -

BIOS Setup

5-3-5 

IIO Configuration

Parameter

Description

IIO Configuration

Intel

®

 VT for Directed I/O (VT-d)

Press [Enter] to configure advanced items.

 

Š

Intel

®

 VT for Directed I/O (VT-d)

 

– Enable/Disable the Intel VT for Directed I/O (VT-d) support 

function by reporting the I/O device assignment to VMM through 
DMAR ACPI Tables.

 

– Options available: Enable/Disable. Default setting is 

Enable

.

 

Š

ACS Control

 

– Enable: Programs ACS only to Chipset Pcie Root Ports Bridges.

 

– Disable: Programs ACS to all PCIe bridges.

 

– Default setting is 

Enable

.

 

Š

Interrupt Remapping

 

– Enable/Disable the interrupt remapping support function.

 

– Options available: Enable/Disable. Default setting is 

Enable

.

 

Š

PassThrough DMA

 

– Enable/Disable the Non-Isoch VT_D Engine PassThrough DMA 

support function.

 

– Options available: Enable/Disable. Default setting is 

Enable

.

 

Š

ATS

 

– Enable/Disable Non-Isoch VT_D Engine ATS support.

 

– Options available: Enable/Disable. Default setting is 

Enable

.

Summary of Contents for E251-U70
















































































































Reviews:

No comments