manualshive.com logo in svg

Gigabyte E251-U70, User Manual, Page: 57 / 111

Share
Download
Gigabyte E251-U70 User Manual Download Page 57

- 57 -

BIOS Setup

5-2-4  PCI Subsystem Settings

(Note1)  This section is dependent on the available PCIe Slot.
(Note2)  This section is dependent on the available LAN controller.

Parameter

Description

PCI Bus Driver Version

Displays the PCI Bus Driver version information.

PCI Express Slot # I/O ROM

(Note1)

When enabled, this setting will initialize the device expansion 
ROM for the related PCI-E slot.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Onboard LAN1/ LAN2 Controller

(Note2)

Enable/Disable the onboard LAN1/ LAN2 controller.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Onboard LAN1/ LAN2 I/O ROM

(Note2) 

Enable/Disable the onboard LAN1/ LAN2 devices, and initializes 
device expansion ROM.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

PCI Devices Common Settings

Above 4G Decoding

Enable/Disable memory mapped I/O to 4GB or greater address 
space (Above 4G Decoding).
Options available: Enabled/Disabled. Default setting is 

Enabled

.

SR-IOV Support

If the system has SR-IOV capable PCIe devices, this item 
Enable/Disable Single Root IO Virtualization Support. 
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Summary of Contents for E251-U70
















































































































Reviews:

No comments