manualshive.com logo in svg

Gigabyte E251-U70, User Manual, Page: 71 / 111

Share
Download
Gigabyte E251-U70 User Manual Download Page 71

- 71 -

BIOS Setup

Parameter

Description

Enable Intel(R) TXT

Enable/Disable the Intel Trusted Execution Technology support function.

Options available: Enable/Disable. Default setting is 

Disable.

VMX (Vanderpool Technology)

Enable/Disable the Vanderpool Technology. This will take effect after 

rebooting the system.

Options available: Enable/Disable. Default setting is Enable.

Enable SMX

Enable/Disable the Safer Mode Extensions (SMX) support function. 
Options available: Enable/Disable. Default setting is 

Disable

.

Hardware Prefetcher

Select whether to enable the speculative prefetch unit of the processor.

 

Options available: Enable/Disable. Default setting is 

Disable

.

L2 RF0 Prefetch Disable

Options available: Enable/Disable. Default setting is 

Disable

.

Adjacent Cache Prefetch

When enabled, cache lines are fetched in pairs. When disabled, only 

the required cache line is fetched.  

Options available: Enable/Disable. Default setting is 

Enable

.

DCU Streamer Prefetcher

Prefetches the next L1 data line based upon multiple loads in same 

cache line.  

Options available: Enable/Disable. Default setting is 

Enable

.

DCU IP Prefetcher

Prefetches the next L1 Data line based upon sequential load history.  

Options available: Enable/Disable. Default setting is 

Enable

.

AES-NI

Enable/Disable the AES-NI (Intel Advanced Encryption Standard New 
Instructions) support function.
Options available: Enable/Disable. Default setting is 

Enable

.

Summary of Contents for E251-U70
















































































































Reviews:

No comments