Gigabyte E251-U70 User Manual Download Page 85

Page: 85 / 111

- 85 -

BIOS Setup

5-3-10 Runtime Error Logging Settings

Parameter

Description

Runtime Error Logging

System Errors

Enable/Disable system error logging function.
Options available: Enable/Disable. Default setting is

Enable

S/W Error Injection Support

Enable/Disable software injection error logging function.
Options available: Enable/Disable. Default setting is

Disable

Whea Settings

Press [Enter] to configure advanced items.

WHEA (Windows Hardware Error Architecture) Support

– Enable/Disable WHEA Support.

– Options available: Enable/Disable. Default setting is

Enable

Memory Error Enabling

Press [Enter] to configure advanced items.

Memory Error

– Enable/Disable Memory Error.

– Options available: Enable/Disable. Default setting is

Enable

Memory Corrected Error

– Enable/Disable Memory Corrected Error.

– Options available: Enable/Disable. Default setting is

Enable

Uncorrected Error disable Memory

– Enable/Disable the Memory that triggers Uncorrected Error.

– Options available: Enable/Disable. Default setting is

Disable

Summary of Contents for E251-U70
















































































































Search results

Summary of Contents for E251-U70

Reviews:

Gigabyte E251-U70, User Manual, Page: 85 / 111

Search results

Summary of Contents for E251-U70

Reviews: