manualshive.com logo in svg

Gigabyte E251-U70, User Manual, Page: 81 / 111

Share
Download
Gigabyte E251-U70 User Manual Download Page 81

- 81 -

BIOS Setup

5-3-7 

PCH Configuration

Parameter

Description

PCH Configuration

PCH SATA Configuration

Press [Enter] to configure advanced items.

 

Š

SATA Controller

 

– Enable/Disable SATA controller.

 

– Options available: Enable/Disable. Default setting is 

Enable

.

 

Š

Configure SATA as

 

–

Configures on chip SATA type.

 

– AHCI Mode: When set to AHCI, the SATA controller enables its AHCI 

functionality. Then the RAID function is disabled and cannot be 
access the RAID setup utility at boot time.

 

– RAID Mode: When set to RAID, the SATA controller enables both its 

RAID and AHCI functions. You will be allowed to access the RAID 
setup utility at boot time.

 

– Options available: AHCI/RAID. Default setting is 

AHCI

.

 

Š

Alternate Device ID on RAID

(Note 1)

 

– Enable/Disable Alternate Device ID on RAID mode.

 

– Options available: Enable/Disable. Default setting is Disabled

 

Š

SATA Port 0/1/2/3/4/5/6/7

 

–

The category identifies SATA hard drives that are installed in the 

computer. System will automatically detect HDD type. 

(Note 1)  Only appears when HDD sets to 

RAID

 Mode.

Summary of Contents for E251-U70
















































































































Reviews:

No comments