manualshive.com logo in svg

Gigabyte E251-U70, User Manual, Page: 75 / 111

Share
Download
Gigabyte E251-U70 User Manual Download Page 75

- 75 -

BIOS Setup

5-3-4 

Memory Configuration

Parameter

Description

Integrated Memory Controller (iMC)

Enforce POR

When set to Enable, the system enforces Plan Of Record restrictions 
for DDR4 frequency and voltage programming. When set to Auto, 
the system sets it to the MRC default settings.
Options available: Auto, POR, Disable. Default setting is 

Auto

.

Memory Frequency

Configures the maximum memory frequency.

Options available: Auto, 2133, 2400, 2666, 2933. 

Default setting is 

Auto

.

Enable ADR

Enables the detecting and enabling of ADR (Asynchronous DRAM 
Refresh) function.
Options available: Enable/Disable. Default setting is 

Enable

.

Legacy ADR Mode

Enable/Disable the Legacy ADR Mode.
Options available: Enable/Disable. Default setting is 

Disable

.

ADR Data Save Mode

Specifies the Data Save Mode for ADR. Batterybacked or Type 01 

NVDIMM.

Options available: Disable, Batterybacked DIMMs, NVDIMMs. 
Default setting is 

NVDIMMs

.

Erase-ARM NVDIMMs

Enable/Disable Erasing and Arming NVDIMMs.
Options available: Enable/Disable. Default setting is 

Enable

.

Restore NVDIMMs

Enable/Disable Automatic restoring of NVDIMMs.
Options available: Enable/Disable. Default setting is 

Enable

.

Summary of Contents for E251-U70
















































































































Reviews:

No comments