![background image](http://html1.mh-extra.com/html/gharieni/lina-select-alu/lina-select-alu_instruction-manual_2220187074.webp)
73
There are three heat / power levels to choose from
:
Heating level
Visualization via
an LED (diode)
Heating
output
button
Push button
once
Power on /
level
1
single
impulse
for 0.3 seconds,
interval 1 second
30 %
button
Push this
button
again
level
2
double
impulse,
lights up for 0.3
seconds,
interval 1 second
60 %
button
Push this
button
again
level
3
triple
impulse,
lights up for 0.3
seconds,
interval 1 second
90 %
button
Push this
button
again
Power off
NOTICE!
If the heating system is not present on your bed, this is
signalled by the LED above or below the button of the hand control
flashing quickly when you press the button of the hand control to operate
the heating system.