background image

Rev. 10/08

VN

For normal household use only.

 recommended for commercial use.

Production Code:

Service Policy:

We w ill replace any

parts w hich are defective, missing or

damaged during assembly. Please contact

Whittier Wood Products c ustomer s ervice

department directly (by phone, f ax, mail or

email) for replacement parts.

Hours:

 O ur f riendly c ustomer s ervice staff

can be reached Monday-Friday 7:00 a.m. to

5:00 p.m. (Pacific T ime). A mess age can be

left 24 hours a day, 7 days a week.

To Order:

Provide t he complete f urniture

model number (upper left corner of t his

page), part letter/number, production code,

quantity needed, reason for replacement

and your f ull name and address along w ith

a telephone number in case we need to

contact you.

Parts s hip from our Eugene, Oregon factory

within 1 or 2 business days from the time

we r eceive the re quest. Please all ow 5-10

business days for delivery.

Outside U.S. or Canada: 541-687-0213

Fax: 541-687-2060 • www.whittierwood.com 

Mail: P.O. Box 28 27 • Eugene, Oregon 97402, U.S.A.

P.O. Box 2827

Eugene, OR 97402 USA

Presented by Whittier Wood Products

Model # 

963KFSIc

SIENNA FINISH

Potting Bench

Assembly I nstructions

Your piece of GardenWood furniture has been finished

at the factory with a tinted, penetrating oil that contains

both UV and anti-fungal inhibitors. For best results, es-

pecially in extreme climates, another coat of protective oil

is recommended before using for the first time. A surface

coating is vital for the protection of your furniture. Treat-

ment should be applied at least once or twice a yea r.

Read both the Assembly Instructions and

Maintaining the Beauty of Garden Wood Furniture

completely before beginning. 
Inspect your furniture pe riodically for any loose

glue joi nts or s crews, or any other problem w hich

may be affecting t he stability of your furniture.

Tighten or rep air as needed. 

Do not climb, sit, or stand on this piece of

furniture.

Unload items from this unit prior to moving.
Do not overload shelves on this unit.

Summary of Contents for SIENNA FINISH 963KFSIc













Reviews: