81
2.
The
other actuators
must be set to
min
. position; that means:
a.
The lifting column for adjustment of the
WORKING HEIGHT
must be set
to its lowest setting! Use
button A1
of the relevant hand control / s. fig.
below.
b.
the actuator of the
INCLINATION OF THE SEAT AREA
must be set to its
lowest setting, i.e. the seat must be adjusted horizontally.
C
AUTION
!
Keep pressing
button C1
of the hand control
until the
actuator is switched off
.
c.
the actuator of the
LEGREST
has also to be set to min., i.e. keep pressing
button D1
of the hand control
until this actuator is also switched off
;
this can be heard clearly.
❖
The initialisation is completed when the described positions are reached.
I
NITIALISATION
L
INA SELECT WOOD
/
STATIC
1.
The
BACKREST ACTUATOR
must be fully
extended
.
The
BACKREST
must have an angle of approx. 75° to the seat area;
use
button T 2
of the hand control / s. fig. below.
2.
The lifting column for adjustment of the
WORKING HEIGHT
must be moved
to its lowest position; to do this, use
button T 1
on the hand control / s. fig.
below.
3.
The
ACTUATOR FOR THE INCLINATION OF THE SEAT AREA
must be
completely retracted, i.e. the seat area must be adjusted horizontally.
A
TTENTION
!
Please keep button T 3 of the hand control pressed
until the
actuator is switched off
!
4.
The
ACTUATOR OF THE LEGREST
must also be completely retracted, i.e.
adjusted vertically. Please keep
button T 4
of the hand control
pressed
until the actuator is switched off audibly
!
❖
The initialization is completed when the described positions are reached.