42
DE
-
ACTIVATION OF THE LOCKING FUNCTION
:
1.
To release, press the
LOCK
button (
T
5
) on the hand
control t
wice in quick succession
(double-tap) and
hold it down
for approx. 3 seconds.
2.
The successful unlocking is again confirmed by an acoustic
signal and the LED below the button of the hand control
goes out.
3.
The drives are now unlocked.
11.1.3 Memory hand control (Lina Select Wood / Static)
Lina Select Wood and Lina Select Static only!
Optional equipment.
The hand control is a wired control.
This enables the operation of the electrically controllable functions.
Saving certain lying positions is described in chapter 11.1.3.2
MEMORY
FUNCTIONS OF THE HAND CONTROL
.
❖
You can control the lifting column and the three actuators by pressing and
holding down the corresponding button.
❖
Furthermore, you can individually adjust and save two memory positions.
❖
It is also possible to recall the four pre-set positions.
❖
The hand control has 12 buttons.
❖
The adjustment of the working height, the backrest, the inclination of the
seat area, and the legrest (buttons T 1 - T 4 on the hand control) is done
using the double-tap system.
❖
This is for safety reasons.
A movement that is associated with danger is made consciously by this.
For the direction of movement, please note the arrow symbols and the
number of dots in the upper area of the hand control.
By simply pressing a button and keeping it pressed, a movement is made upwards.
By pressing a button twice (double-tap system) and keeping it pressed,
a movement is made in the opposite direction.
Storing the two individually adjustable and storable positions and de-activating the
locking function is also done using the double-tap system.