34
L
INA
S
ELECT
A
LU
:
H
OW TO RECALL A PREVIOUSLY SAVED MEMORY POSITION
1.
Press the
SHIFT BUTTON
.
2.
The LED goes on (
LEVEL
2
).
3.
Press and
hold
the desired
MEMORY BUTTON
(hotkey: M 1
- M 4)
until
the saved treatment position has been
reached.
M
1 - M
4
11.1.1.3 Adjustment of the working height
❖
For adjustment of the
WORKING HEIGHT
press the pair of buttons «
A
/
A1
»
of the hand control; s. fig. in chapter 11.1.1
ALU DESIGN HAND CONTROL OF
THE
L
INA SELECT ALU
.
❖
The direction of movement (up or down) is indicated by the arrow symbols on
the hand control.
❖
The horizontal
WORKING HEIGHT
of the Lina Select is adjustable from approx.
54 cm up to approx. 96 cm.
❖
The horizontal
WORKING HEIGHT
of the Lina Select (soft upholstery)
is adjustable from approx. 59 cm up to approx. 101 cm; due to the thicker
upholstery.
❖
The entry height is the lowest position of the seat
▪
Lina Select
: approx. 54 cm / seat in horizontal position.
▪
Lina Select
(
soft upholstery
): approx. 59 cm / seat in horizontal
position.
❖
By extracting the adjustable feet (up to 3 cm) or installing castors (approx. 8 cm
/ optional accessories) will increase the
WORKING HEIGHT
a bit.
❖
Usually, the Lina Select is entered from the side. Fold back the armrests for easy
access. As the legrests can be adjusted vertically, it is also possible to enter the
Lina Select from the front. This mode is advantageous, when access from the
side is not ensured.