56
S
ELECTION OF A FUNCTION
:
R 1
R 1 /
RIGHT FOOT SWITCH
-
UNIT
:
➢
serves as
SAVE BUTTON
when you have selected the memory
function.
R 2
R 2 /
RIGHT FOOT SWITCH
-
UNIT
:
➢
selects the
ACTUATORS
(height, backrest, seat inclination, leg
section)
or
the
MEMORY FUNCTION
(lower diode)
step by
step
. The relevant diodes on the connector go on (s. above;
fig. 2).
«
»: this diode represents the
ACTUATOR OF THE LEG
SECTION
.
«
»: this diode is
disabled
und will be skipped during
the selection of the actuators.
L 1 / L2
L 1
and
L 2
/
LEFT FOOT SWITCH
-
UNIT
:
➢
push buttons to adjust the selected actuator. The direction of
movement (up or down) is indicated by the arrow-symbols.
➢
push buttons to save and retrieve the treatment positions
(memory positions).
H
OW TO ADJUST THE ACTUATORS
1.
Select the desired actuator (height, backrest, seat inclination, leg section) using the
push button
R 2
of the
right
foot switch-unit. Press the push button
R 2
repeatedly until the relevant diode on the connector goes on (s. above; fig. 2).
2.
Press the push buttons
L 1
or
L 2
of the
left
foot control unit to adjust the
selected actuator (s. above; fig. 1). The direction of movement (up or down) is
indicated by the arrow-symbols.