![background image](http://html1.mh-extra.com/html/gharieni/lina-select-alu/lina-select-alu_instruction-manual_2220187058.webp)
57
H
OW TO SAVE A TREATMENT POSITION
(
MEMORY POSITION
)
1.
Set the desired position as normal.
2.
Press the push button
R 2
of the
right
foot control unit repeatedly until the
lower
diode
«
» on the connector goes on; s. above; fig. 2.
3.
Press the push button
R 1
to activate the saving function.
4.
Select the desired save button (
L 1
/ memory 1
or
L 2
/ memory 2) of the
left
foot control unit to save the set treatment position. Press and hold the desired
save button (L 1 or L 2) until you hear an acoustic signal.
5.
The set treatment position is saved.
H
OW TO RETRIEVE A PREVIOUSLY SAVED TREATMENT POSITION
(
MEMORY POSITION
)
You can retrieve
two
previously set treatment positions using the left foot
switch-unit.
1.
Press the push button
R 2
of the
right
foot control unit repeatedly until
the
lower diode
«
» on the connector goes on; s. above; fig. 2.
2.
Press and
hold
the push buttons
L 1
or
L2
of the
left
foot control unit
until
the
previously saved treatment position is reached.
H
OW TO ACTIVATE THE LOCKING FUNCTION
1.
Press
and hold
the push button
R 2
until an acoustic signal sounds.
2.
Immediately
after
this acoustic signal (
within 3 seconds
) press and hold the
push button
L 1
until another acoustic signal sounds.
3.
The locking function of the foot control is
activated
.