46
11.1.3.1 Locking function
❖
The
Lina Select Wood/Static
is equipped with a
LOCKING
function
to protect the treatment table from unauthorized use.
❖
By default, no automatic locking is set.
You can decide for yourself whether to change this.
The currently running heating cycle is
not affected
by an automatic locking..
❖
A manual lock also
does not affect
the currently running heating cycle and
has
no effect on the operation of the heating system.
VARIOUS AUTOMATIC LOCKING TIMES
:
Various automatic locking times can be set.
To get feedback on the currently set automatic locking time, press buttons
T9 and T10 once simultaneously.
Feedback on the currently set automatic locking time is given as follows
via flashing of all LEDs of the hand control ana several beeps, depending on the
automatic locking time:
➢
automatic locking after
30
minutes:
1
beep and
1 time
flashing of all LEDs of the hand control
➢
automatic locking after
60
minutes:
2
beeps and
2 times
flashing of all LEDs of the hand control
➢
automatic locking after
90
minutes:
3
beeps and
3 times
flashing of all LEDs of the hand control
➢
automatic locking after
120
minutes:
4
beeps and
4 times
flashing of all LEDs of the hand control
➢
no
automatic locking:
5
beeps and
5 times
flashing of all LEDs of the hand control
To change from one automatic locking time to the next, please press both buttons
T9 and T10 simultaneously and keep them pressed for about 6 seconds.
All LEDs flash and a corresponding beep is sounded to provide feedback on the
currently set automatic locking time, followed by a change to the next automatic
locking time.