![background image](http://html1.mh-extra.com/html/gharieni/lina-select-alu/lina-select-alu_instruction-manual_2220187040.webp)
39
❖
Extracting of the adjustable feet (up to 3 cm) or the installation of castors
(approx. 8 cm / optional accessories) will increase the
WORKING HEIGHT
a bit.
❖
Usually, the Lina Select is entered from the side. Fold back the armrests for easy
access. As the legrest can be adjusted vertically, it is also possible to enter the
Lina Select from the front. This mode is advantageous, when access from the
side is not ensured.
11.1.2.2 Adjustment of the backrest
❖
The inclination of the
BACKREST
of the Lina Select Wood / Static can also be
adjusted using the hand control.
❖
For adjustment of the
BACKREST
press button «
T 2
» of the hand control;
s. fig. in chapter 11.1.2
HAND CONTROL WITHOUT MEMORY
(L
INA SELECT
WOOD
/
STATIC
).
❖
The direction of movement (up or down) is indicated by the arrow-symbols
and the number of dots on the hand control.
❖
Press the button once and hold it down to raise the backrest.
Press the button twice and hold it down to lower the backrest.
WARNING!
While adjusting, always check that fingers cannot be
caught between the backrest and the seat. RISK OF CRUSHING!
11.1.2.3 Adjustment of the inclination of the seat area
❖
The inclination of the seat area of the Lina Select Wood / Static can also be
adjusted using the hand control.
❖
The inclination of the seat area is fully-adjustable (s. fig. below).
❖
For adjustment of the
INCLINATION OF THE SEAT AREA
press button «
T 3
»
of the hand control; s. fig. in chapter 11.1.2
HAND CONTROL WITHOUT MEMORY
(L
INA SELECT WOOD
/
STATIC
).
❖
The direction of movement (up or down) is indicated by the arrow-symbols
and the number of dots on the hand control.
❖
Press the button once and hold it down for an upward movement.
Press the button twice and hold it down for a downward movement and hold
the button down each time to adjust the inclination of the seat area.