![background image](http://html1.mh-extra.com/html/gharieni/lina-select-alu/lina-select-alu_instruction-manual_2220187071.webp)
70
15. Heating system Lina Select Wood / Static (optional
equipment)
❖
The upholstery surface of the Lina Select Wood / Static can be heated to
increase comfort.
It is a pre-programmed and fully automatic heating system which allows
comfortable operation. This heating system is integrated in the upholstery of
the bed and works with modern microprocessor technology.
For the Lina Select Wood / Static, the heating system is optionally available at
extra cost.
❖
Due to the pre-programmed microchip, you only must switch on the heating
system using the power button to start the heating system with the lowest heat /
power level.
To quickly heat up the bed‘s surface before starting treatment, we
recommend setting the heating system to level 3 (highest level).
The heating program is fully automated and switches off automatically after
a total time of 90 minutes.
➢
s. chapter 15.1
OPERATION
.
❖
Various automatic locking times can be set, s. chapter 11.1.3.1
LOCKING
FUNCTION
. The currently running heating cycle is
not
affected
by this.
❖
Even a manual locking
does not affect
the currently running heating cycle and
has
no effect on the operation of the heating system either.
➢
s. chapter 11.1.2.5 resp. 11.1.3.1
LOCKING FUNCTION
.
➢
s. chapter
13.
FOOT CONTROL
L
INA SELECT WOOD
/
STATIC
(
OPTIONAL
EQUIPMENT
).
CAUTION!
If your Lina Select is equipped with the optionally
available heating system, do not place heavy blankets, clothing or similar
on the upholstery while the heating system is switched on. RISK OF
DAMAGE! RISK OF BURNS!
NOTICE!
The currently active heating level is visualized via an LED
(diode) above or below the button of the hand control or in the middle
section of the optional foot control.
The frequency of the impulse for visualization varies accordingly.