GF CNC 4.0 400, Instruction Manual

Page: 84 / 200

12 Error/Warning messages Operating instructions CNC 4.0 400/500/630
78
Message Display page Meaning Possible causes Actions
Badge expired! SCAN
OPERATOR
BARCODE
/
OPERATOR
BARCODE
MANUAL
INPUT
Operator
badge is
expired!
If MANDATORY
mode it’s not
possible to get
the next
process step.
Scan a valid
operator barcode
according to ISO
12176-3
BARCODE ERROR
SWITCH OFF
AND RESTART
Dedicated
page.
The operator
barcode
doesn’t
correspond to
ISO 12176-3;
Switch off the
machine and
restart: scan an
operator barcode
according to ISO
12176-3
Checksum! SCAN
OPERATOR
BARCODE
/
OPERATOR
BARCODE
MANUAL
INPUT
/
TRACEABILITY
DATA ERROR
The control
character of
the barcode
doesn’t
correspond to
the other digits
according to
ISO 12176-3,
12176-4.
Barcode is wrong
or barcode
reader has not
been properly
pointed at
barcode symbol.
Check the barcode
and re-input it.
DIAMETER
MISMATCH!
SDR MISMATCH!
TRACEABILITY
DATA ERROR The data read
in the pipe /
fitting bar code
don’t
correspond to
the selected
diameter or
SDR.
1) Selected
welding
parameters
are wrong
2) Pipe / fitting
barcode is
wrong or
barcode
reader has not
been properly
pointed at
barcode
symbol
1) Push CHANGE
SELECTED
PARAMETERS to
re-select the
diameter / SDR
or push ◄ to
reset data and
quit.
2) Check the bar
code and then
push the ◄
button to
proceed again
with scanning.