GF CNC 4.0 400, Instruction Manual

Page: 11 / 200

Operating instructions CNC 4.0 400/500/630 2 Safety instructions
5
Danger of injury due to high pressure oil leakages!
Inspect the outside wall of hydraulic hoses under pressure: make sure
you wear safety glasses before doing it!

Do not touch leaking oil with hands! Escaping high pressure oil can
cause skin penetration injuries!
Release the oil pressure to zero before replacing defective hoses.
Danger of bruising!
Machine components are heavy!
To move the components, use the gloves! (EN 388 2241)
Danger of injury!
The base machine is high!

It is strictly forbidden to go onto the base machine!
Accidental fall could result in death or extremely serious injury!
2.3 Disposal
Shavings and used hydraulic oil should be disposed of properly.
Observe all the regulations, standards and guidelines applicable in your
country.
Separate collection of electronic and electrical waste (from the
equipment) has to be ensured through appropriate systems. Observe all
the regulations, standards and guidelines applicable in your country.
note:
The symbol below indicates separate collection for electrical and
electronic equipment according to 2002/96/CE WEEE directive (Waste
Electrical and Electronic Equipment).
Warning
EN 388 2241
Danger