GF CNC 4.0 400, Instruction Manual

Page: 74 / 200

10 Data Operating instructions CNC 4.0 400/500/630
68
By using the  arrows it is possible to move from one welding protocol
to the other. If status number is 0, it means that the welding was
completed successfully; if another number is displayed, it means that an
error occurred during the process: refer to the following table to check
the error code.
Error code Description
12 Heating element temperature too low
13 Heating element temperature too high
6 Ambient temperature too low (under -5°C)
7 Ambient temperature too high (over 50°C)
27 Time t3 over the limit
29 Time t4 over the limit
42 Power interruption during the last welding
43 Welding interrupted with stop button
15 Pressure P1 too low
16 Pressure P1 too high
18 Pressure P2 too high
19 Pressure P5 too low
20 Pressure P5 too high
21 Pressure P6 too low
28 Pressure P6 too high
80 Pipe slipped during cooling time
85 Carriage opened during heating time
The button is given to work in case of label printer connection (see
chapter 10.4).
10.3 GPS
By pushing this button it is possible to visualize the geographical
coordinates (latitude, longitude) of the hydraulic controller position: