TSA 160 NT and variants
27
Installation
X
Insert the wire rope (1) in the IS block (active leaf) and fasten it with the clamping screw (3).
Installation on the passive leaf drive
X
Push the cam plate (6) onto the lever (4) of the
fixed leaf drive and pre-assemble using the
clamping screws (5) as shown in the drawing.
The control contour (7) faces the trip rocker.
X
Install the trip rocker (8) as shown in the sketch.
X
Install the link arm or roller guide rail on the
passive leaf, see section 8.5.1 or 8.5.2.
X
Guide the wire rope (1) through the spindle (9).
X
Lay the trip rocker (8) against the cam plate (6).
à
The release rocker’s maximum deflection is in
this position.
