TSA 160 NT and variants
30
Installation
6.6.2 Transom installation hinge side with roller guide rail
WARNING!
Risk of injury when the door is let go (TSA 160 NT Invers).
X
Fix the door in place if necessary.
X
Drill threaded holes on the door frame or
mounting plate.
X
Fix the door drive to the door frame or moun-
ting plate.
X
Slide the roller lever (3) onto the drive shaft (1)
at an angle of approx. 37° to the door plane.
X
Fasten using screw M6 (2).
X
Insert the roller guide rail (5) on the roller (4)
of the lever (3) and fix to the door leaf using 2
screws M5.
X
Check free movement of the roller in the roller
guide by pushing the door closed manually.
X
Set the floor stop buffer in such a way that the
door is pressed sufficiently firmly against the
floor stop buffer by the spring force.
