SECULOGIC TZ300
5
Safety and responsibility
Safety and responsibility
2
The GEZE door control unit has been designed according to the latest technical standards and acknowledged
safety rules and regulations. Dangers can, nevertheless, occur in its installation and use. You must therefore
observe the following instructions.
General safety instructions
2.1
Installation, commissioning and repairs must be performed only by GEZE-authorized specialists.
X
Use only genuine GEZE parts for repairs.
X
GEZE accepts no liability for damage arising from unauthorized modifications to the installation.
X
Primary building safety measures must be taken by the owner.
X
Cables must be laid according to standards VDE 0100 and VDE 0815.
X
To prevent unauthorized access, never leave the key in the key switch.
X
Doors with electrical locks along escape routes should be inspected annually by a specialist. The specialist
X
must issue a certificate verifying the periodic inspection, which the owner must submit to the building inspec-
torate on request. The inspection can be performed by a GEZE service technician or a GEZE-authorized service
provider as part of a maintenance contract.
In addition, GEZE recommends a monthly inspection of the emergency exit system for visible damage and
X
faults by the owner. Any identified damage or faults must be rectified immediately by a GEZE service technici-
an or a GEZE-authorized service provider.
Intended use
The GEZE door control unit is intended for controlling and monitoring electrically locked emergency exits. Third-
party products must be used only after consultation with GEZE.
Improper use
Improper use includes the connection of any products that are not expressly approved by GEZE.
Target readership and qualifications
2.2
Installation, assembly, commissioning and repairs must be performed only by GEZE-authorized specialists.
Product liability
2.3
According to manufacturers’ liability for their products as defined in the German product liability act, the
à
information contained herein and in the associated installation instructions and wiring diagrams (product in-
formation and intended use, incorrect use, product performance, product maintenance, obligation to inform
and obligation to provide instruction) must be observed. Non-observation frees the manufacturer from their
liability.
Installation, function testing and maintenance must be performed only by GEZE-authorized personnel. GEZE
à
accepts no liability for damage arising from unauthorized modifications to the installation.
A combination with third-party devices invalidates GEZE’s warranty. For repair and maintenance, use only
à
original GEZE parts.
Summary of Contents for SecuLogic RWS TZ 300
Page 41: ...SECULOGIC TZ300 41...
Page 42: ...SECULOGIC TZ300 42...
Page 43: ...SECULOGIC TZ300 43...
