GEZE SecuLogic RWS TZ 300, Installation And Commissioning Instructions With Wiring Diagram

Page: 37 / 44

SECULOGIC TZ300
37
Appendix
Glossary of terms 7.2
Direct unlocking (according to EltVTR)
Safety-relevant interruption of the power supply to the electrical lock through an NC contact when the emer-
gency button is pressed.
Unlocking (according to EltVTR)
Non-safety-relevant interruption of the power supply to the electrical lock, for example with a key switch.
Unlocking (according to EltVTR)
Non-safety-relevant interruption of the power supply to the electrical lock, for example by a hazard alert system
(GMA) or similar automatic triggering system.
Pre-alarm
If the door is passed through after the short-term release time has expired, an audible signal is issued to warn
the user that the short-term release time has expired. The pre-alarm duration is 60 seconds. If the door is closed
while a pre-alarm is active, the door is locked automatically and the pre-alarm is reset.
Door alarm
If the pre-alarm time is exceeded, the door alarm is triggered. This must then be reset with the built-in key switch
or with a new short-term release command. If the door is closed while the door alarm is active, it locks and can
be unlocked again only after the alarm has been reset (except when the emergency button is pressed). The door
alarm is also triggered when the door is opened forcefully.
Cancelling short-term release
If the door is closed before the short-term release time has expired, short-term release is terminated and the
door locked again. This prevents unauthorized access through the door after an authorized person has passed
through it.
Retriggering short-term release
If the short-term release function is triggered again while the function is still active, the short-term release period
starts again.