GEZE Powerturn, Installation And Service Instructions Manual

Page: 36 / 56

Powerturn
36
Installation
X
Align the door with the roller guide rail (5) and the suspension bolts (6).
Danger of damage to the thread.
X
Ensure that the suspension bolt is screwed in straight.
X
Screw in the suspension bolt (6) and tighten it in a counter-clockwise direction (tightening torque = approx. 15 Nm).
X
Remove the mounting aid.
The door closes and remains in the closed position on account of the pre-load.
X
Install the door stop buffer (4) (for max. opening angle see chapter 5.3).
X
Set the position of the integrated opening restrictor, see chapter 7.10.
7.16.2 Disassembling the lever
The lever is disassembled in the reverse order of installation for all types.
The door can assume any position.
Pay attention to the correct direction of rotation of the mounting aid.
X
Attach the mounting aid (see chapter 7.15).
X
Release the suspension bolts and remove the lever.
X
Remove the mounting aid.