GEZE Powerturn, Installation And Service Instructions Manual

Page: 23 / 56

Powerturn
23
Installation
X
Screw down the mounting plate (3).
X
Install the 2nd drive on the right side
in the same way.
7 Installation
Heed the installation check list in chapter 11.
7.1 Installing the mounting plate
à
Make sure the mounting plate is in
the correct position, see directional
arrow (1).
à
Use one screw per screwing point (2).
Refer also to “Explanation of screwing
point” on page 13.
à Prefer the outer drill grooves.
X
Screw the mounting plate down at
a minimum of 8 screwing points.
7.2 Cable guide surface-mounted on the hinge-side end cap
7.2.1 Cable guide via door transmission cable for door leaf installation
X
Push the connecting bracket (2) under the
mounting plate (1) and screw it tight using
2 screws.