GEZE Powerturn, Installation And Service Instructions Manual

Page: 24 / 56

Powerturn
24
Installation
X
Screw the door transmission cable onto
the connecting bracket (2).
Preparing end cap
The pocket (4) only needs to be cut out if a door transmission cable is being used.
à
For all other installation types, carefully detach both side panels (1) and (2).
X
Remove the side panels from the packag-
ing and carefully detach the left-hand side
panel (2).
X
Dispose of the gate (3).
3
X
Cut the pocket (4) out of the end cap (2)
along the perforation.
X
Install the end cap, see chapter 9.3.2.
4