ECturn/ECturn Inside
17
Contact sensor
7
Contact sensor
à
The K input is only active in the AU mode of operation.
à
The contact sensor function can also be activated via the WRB-5 wireless module, channel 1 (see chapter 8.1.1,
à
When activated, the door opens.
à
When activated, the output of the contact sensor is closed (24 V applied to the K input).
à
The sensor for monitoring closing can also be used as a contact sensor (SIS and K function), see chapter 5,
“Safety sensor close and open”.
à
The contact sensors K and KB have the same opening delay.
à
The hold-open time when actuating via K can be set separately.
X
Set the parameters:
à
O h
(hold-open time).
7.1 GC 302 R radar movement detector
à
GC 302 R black, mat. no. 124087
à
GC 302 R according to RAL, mat. no. 124088
(remote control does not work with detector
hood mounted, LED not visible)
à
The GC 302 R is a directionally sensitive radar
movement detector.
à
Accessories:
à
Remote control, mat. no. 099575
à
Ceiling installation kit, mat. no. 115384
à
Rain cover, mat. no. 115339
X
Observe installation instructions GC 302 R.
WH
BU
BK
BN
50mA
+UB
-UB
1
2
3
4
5
24VSENS
K
GND
4
21
1
K
GC302 R
7.2 Push buttons (potential-free contact)
à
GC 306 non-contact push button, mat. no. 163028
à
GC 306 non-contact push button with hand pictogram,
mat. no. 163029
à
Plastic elbow switch, white, mat. no. 114078
à
Plastic elbow switch, stainless steel, mat. no. 114077
à
Stainless steel elbow switch, mat. no. 119898
à
LS 990 stainless steel elbow switch, surface-mounted,
mat. no. 128582
à
LS 990 stainless steel elbow switch, flush-mounted,
mat. no. 128583
à
Accessories:
à
IP65 switch insert, mat. no. 114156
à
Additional contact, mat. no. 114157
à
WTM transmitting module, can be clipped in,
mat. no. 131212
à
Back plate for plastic elbow switch,
à
white, mat. no. 131219
à
stainless steel, mat. no. 131220
21
4
2
K
K
4VSENS
