ECturn/ECturn Inside
5
Notes
1
Notes
1.1 Important safety instructions
To ensure personal safety, it is important to follow these safety instructions.
X
Keep these instructions.
à
Only specialists who are authorised by GEZE are permitted to carry out installation, commissioning and maintenance.
à
Unauthorised modifications to the system release GEZE from liability for any resulting damages.
à
GEZE does not accept any warranty for combinations with third-party products. Only original GEZE parts may
be used for repair and maintenance work as well.
à
Attach safety stickers to glass door leaves, mat no. 081476.
X
In accordance with Machinery Directive 2006/42/EC, a safety analysis is to be performed and the door system
marked in compliance with CE Marking Directive 93/68/EEC before the door system is commissioned.
à
Observe the latest versions of guidelines, standards and country-specific regulations, in particular:
à
ASR A1.7 “Guidelines for doors and gates”
à
EN 16005 “Power operated pedestrian doorsets - Safety in use - Requirements and test methods”
à
DIN VDE 100-600 “Low-voltage electrical installations - Part 6 Verification”
à
DIN EN 60335-2-103 “Household and similar electrical appliances - Safety; Particular requirements for drives
for gates, doors and windows”
à
Accident-prevention regulations, especially BGV A1 (VBG1) “General regulations”
à
BGV A3 (VBG4) “Electrical installations and equipment”
1.2 Installation information
à
The drive is designed exclusively for use in dry rooms.
X
Use only the cables specified on the cable plan provided. Cables must be shielded in compliance with the wiring
diagram.
X
Always use insulated wire-end ferrules for wire cores.
X
Insulate wires that are not used.
X
Secure loose, internal drive cables with cable ties.
X
Observe the maximum permitted total power consumption required to supply the periphery.
1.3 Safety-conscious working
X
Secure workplace against unauthorised entry.
X
Watch the swivelling range of long system parts.
X
Secure the drive/drive cover/coupling elements against falling.
DANGER
Danger of electric shock!
X
Before working on the electrical system, disconnect the power supply (mains and rechargeable battery) and
check that no voltage is present. When an Uninterruptible Power Supply (UPS) is used, the system will still be
under voltage even when disconnected from the mains.
à
Danger of injury with opened drive. Hair, clothing, cables, etc. can be drawn in by rotating parts!
à
Danger of injury caused by unsecured crushing, impact, drawing-in or shearing spots.
à
Danger of injury due to sharp edges on the drive.
à
Danger of injury due to glass breakage. Always only use safety glass.
à
Danger of injury when working at heights.
1.4 Inspection of installed system
X
Measures for checking safety and prevention of crushing, impact, shearing or drawing-in spots.
X
Check the function of the presence sensors and movement detectors.
