Gewa Control Omni, Setting Manual

Page: 12 / 52

12
Automatic Scanning start
The scanning will start automatically when coming to a new page. This can be set to On or
Off and applies to all user pages.
Change Automatic Scanning Start by using the following procedure:
 System  Scanning  More  Automatic start
Default setting: Off
First step delay
The time for the first step delay is twice the selected scanning speed. It is possible to turn this
off.
Change First step delay by using the following procedure:
 System  Scanning  More  First step delay
Default setting: On
Touch Screen Scan
This setting makes the whole touchscreen to become scan input. This can be set to On or Off
and applies to all user pages.
Change to Touch screen Scan by using the following procedure:
 System  Control/input  Touch Screen Scan  Change setting
Default setting: Off
Acceptance Delay
The acceptance delay is the time delay between the pressing of a switch and a function
being activated in Control Omni. This delay can be used to prevent Control Omni being
activated by mistake, as might happen if the user has, for example, muscle spasms. The
delay can be set between 0 and 0.9 sec. The acceptance delay is affected by pressing on the
screen, external switches and membrane buttons.
Change the acceptance delay by using the following procedure:
 System  Control/input  Acceptance delay  Change setting
Default setting: 0 sec