Gewa Control Omni, Setting Manual

Page: 9 / 52

9
Scanning Settings
Scanning Methods
Different scanning methods can be used with your Control Omni. Selections can be made
between one or two switches, automatic or manual scanning, row/column or linear scanning,
forced scanning or repetition. The default setting selected when your Control Omni is
delivered will be automatic linear scanning that is controlled by one switch.
The various scanning methods are as follows:

Automatic scanning: Your Control Omni continues to steps forward automatically following
a press on the switch.

Manual scanning: Your Control Omni steps forward one step at a time for each press of
the switch.

Forced scanning: It is possible to force automatic scanning by pressing the switch several
times.

Repetition: It is possible to make your Control Omni step automatically when using
manual scanning by keeping the switch pressed.

Row/column scanning: This can be either manual or automatic
– the principle is the same
in both cases. First, steps are taken row for row and then buttons along the selected row
are stepped.

Linear scanning: This can be either manual or automatic
– the
principle is the same in both cases. The buttons along row 1 are
first stepped, and then the stepping continues along row 2, etc.
Fig 11
Scanning
between
rows
Fig 9
Scanning
between
buttons
on a
selected
row
Fig 10