Gewa Control Omni, Setting Manual

Page: 11 / 52

11
Scanning Speed
Your Control Omni steps forward with a certain speed when using automatic scanning. This
speed can be adjusted between 0.2 and 10 steps/sec. You can test the speed before the
choice is finally made, in order to prevent too high a speed being selected by mistake.
Change the scanning speed by using the following procedure:

System

Scanning

Speed
Default setting: 1 step/sec
Number of scanning loops
A scan loop is completed when your Control Omni has stepped through a page and starts
again from the beginning. The number of scan loops can be adjusted between 1 and 5.
Change the number of scanning loops by using the following procedure:
 System  Scanning  Number of scans
Default setting: 2 loops
Scanning appearance
The scanning appearance can be changed by using a bright/dark background, with a frame
around the scanning box
and your choice of frame colour.
Change scanning appearance by using the following procedure:
 System  Scanning  More  Scanning appearance
Default setting: Red frame and dark background
Automatic return
This will return automatically to the Start page if the number of scanning loops is completed.
This can be set to On or Off and applies to all user pages.
Change Automatic return by using the following procedure:
 System  Scanning  More  Automatic return
Default setting: Off