Gewa Control Omni, Setting Manual

Page: 8 / 52

8
Activate the mobile phone
Your Control Omni has a built-in mobile phone. To make it work it must be
equipped with a SIM-card. The SIM-card is not included but must be bought
separately.
Activate the Mobile phone by using the following procedure:
1. Carefully remove the SIM-card holder using your nail.
2. Insert the SIM-card. Turn it according to the figure.
3. Put the SIM-card holder back.
4. Switch off and on the mobile phone by the procedure below.
5. Enter the PIN code. Note! It may take some time before it is possible to
make a phone call.
Switch off/on the mobile phone by using the following procedure:
 Phone  More  On/Off
Change the PIN code
It is possible to change and deactivate the PIN code.
Activate/ deactivate the PIN code by using the following procedure:
 Phone  More  PIN code
Screen lighting
The screen brightness can be set at 3 different levels.
Note! The brightness affects the power supply, the brighter your screen, the higher
consumption.
Change the screen lighting by using the following procedure:

System

Display backlight

Backlight
Default setting: Dark
Fig 7
Fig 8